Roll forming lines, special machines for sheet metal working and production of metal profiles

Brasileiro Deutsch Espanol Francais Italiano

51201-FLEXIBLE LINE FOR CABLE TRAYS


Flexible line for the production of cable channels.
This solution carries out the punching and cut before the profiling/bending, therefore the changing time is very short and it is not necessary to change the cutting dies. The punching can be excluded with rapid changes between one dimension and another (as option it is possible to have supplementary lateral punching units).
Besides in the bending both width and height of the channel are changed automatically from the control desk (roll forming line with mobile supports).
On request unloaders/stackers with automatic steel strapping unit.

Attached images
General view of initial part of machine
Finished product
Exit view of punching bench
Detailed view of punching bench
Detail of roll forming line
Three-dimensional representation of product
Strip introduction zone
Detail of conveyor exit zone
Control panel
Technical data
Maximum width 1000 mm
Minimum profile length 1000 mm
Maximum profile length 4000 mm
Min. material thickness 0.8 mm
Decoiler capacity 5 t
Minimum width 50 mm
Maximum width 500 mm
Minimum height 30 mm
Maximum height 100 mm
Line speed 4-5 mt/min
Installed power 70 kW
Absorbed power 50 kW
Material: galvanized (1,5 mm)
Material: aluminium (2 mm)
Line colour to be determined
Line direction to be determined
Skype Me!Skype Me!
PM sas - Via Montegrappa 109 - 30030 Salzano (VENICE) - ITALY -- Tel. +39 0415745047 -- 45.535134;12.10876 P. IVA 02228830275